Crossbows - Everything about Building, Modding, and Using your Crossbow Gear

Latest topics

» 15th century saxon prods
by stuckinthemud1 Today at 3:26 pm

» Yet another one
by jocky Today at 7:09 am

» Chinese crossbow with auxiliary string?
by c sitas Yesterday at 11:34 am

» Crusader crossbow
by c sitas Thu Jun 22, 2017 9:41 pm

» Whamo showed up, prod replacement ideas
by kenh Mon Jun 19, 2017 4:25 pm

» Renaissance Sporting crossbow
by tony a Mon Jun 19, 2017 2:10 am

» loose laminate issues
by c sitas Sun Jun 18, 2017 8:42 am

» Of Bows and Torsion Engines
by c sitas Fri Jun 16, 2017 2:55 pm

» My second crossbow
by Daniel Levesque Fri Jun 16, 2017 10:48 am

» Need to locate Windlass Crossbow, pre 1600, in Rome, Venice, or Florence
by 8fingers Tue Jun 13, 2017 11:24 pm

» Crossbow Projectiles
by Geezer Tue Jun 13, 2017 8:10 pm

» Greetings!
by OnlyHuman Mon Jun 12, 2017 7:40 am

» Anyone know what this is?
by Yuki23emma Sun Jun 11, 2017 2:54 pm

» Prod specs
by Onager Lovac Mon Jun 05, 2017 4:25 pm

» Finished Crossbow
by kenh Sat Jun 03, 2017 8:34 pm

» The Arbalist Guild - Around the World
by Turnigy Fri Jun 02, 2017 1:25 pm

» Reverse draw "compound" build
by Turnigy Fri Jun 02, 2017 1:20 pm

» Casting Resource
by White Oak Wed May 31, 2017 2:28 am

» The Road so far......
by White Oak Mon May 29, 2017 7:17 am

» GLOSSARY OF TERMS
by Onager Lovac Wed May 24, 2017 6:41 pm

» Hello from Maine
by White Oak Sun May 21, 2017 11:06 pm

» Leonardo Da Vinci string with suport-rolls
by Oppenheimer Tue May 16, 2017 11:40 am

» Compact repeating compound project
by Phil Abrahams Mon May 08, 2017 2:10 pm

» Trying to reduce the power stroke in my next project
by octavioaugusto.oliveira Thu Apr 27, 2017 1:27 pm

» Its good to be back!!
by Juan galeano Tue Apr 25, 2017 9:31 am


    A thank you.

    Share

    Hermit
    Workshop Savvy

    Did you see my tool collection?


    Workshop SavvyDid you see my tool collection?

    Posts : 245
    Join date : 2013-09-10

    A thank you.

    Post by Hermit on Thu Feb 12, 2015 12:52 pm

    Thank you to all who posted on the 'Hardening low carbon steel' thread.As this is a technique that I haven't used personally,I learned a lot from your postings as is usually the case with postings on this forum.This is a usefull technique I will use and one I think might work for arrowheads with some experimenting,certainly one worth trying.
                                       I am allways interested in the old ways of doing things,not from nostalgia,but because they were practical,worked and used common(and cheap) materials that are still readily available today.
                                     Hermit.

      Current date/time is Sun Jun 25, 2017 4:36 pm