Crossbows - Everything about Building, Modding, and Using your Crossbow Gear

Latest topics

» GLOSSARY OF TERMS
by Onager Lovac Wed May 24, 2017 6:41 pm

» Reverse draw "compound" build
by FrenckBrambo Tue May 23, 2017 6:18 am

» Prod specs
by White Oak Tue May 23, 2017 4:23 am

» Crusader crossbow
by c sitas Mon May 22, 2017 8:48 am

» The Arbalist Guild - Around the World
by White Oak Mon May 22, 2017 4:03 am

» Hello from Maine
by White Oak Sun May 21, 2017 11:06 pm

» Need to locate Windlass Crossbow, pre 1600, in Rome, Venice, or Florence
by Vincenti Thu May 18, 2017 7:18 pm

» Leonardo Da Vinci string with suport-rolls
by Oppenheimer Tue May 16, 2017 11:40 am

» Compact repeating compound project
by Phil Abrahams Mon May 08, 2017 2:10 pm

» Trying to reduce the power stroke in my next project
by octavioaugusto.oliveira Thu Apr 27, 2017 1:27 pm

» The Road so far......
by Onager Lovac Tue Apr 25, 2017 4:07 pm

» Its good to be back!!
by Juan galeano Tue Apr 25, 2017 9:31 am

» The crossbow...What is?!
by octavioaugusto.oliveira Sat Apr 22, 2017 2:07 pm

» I need your advices on a new crossbow project
by Daniel Levesque Fri Apr 21, 2017 12:58 pm

» Guidance Designing My First Slinger
by kenh Thu Apr 13, 2017 8:17 pm

» New member
by harry6855 Thu Apr 13, 2017 8:28 am

» Chinese style crossbow trigger 3d modeled with templates.
by Bs1110101 Thu Apr 13, 2017 6:14 am

» Berkhamsted Castle and Glasgow Museum wooden prod crossbow
by hullutiedemies Wed Apr 12, 2017 8:52 am

» Hello from Asia
by Daniel Levesque Wed Apr 12, 2017 6:49 am

» Medieval crossbow modeled in Tinkercad, with variant trigger design.
by Bs1110101 Mon Apr 10, 2017 1:42 pm

» New project"s"
by kenh Sun Apr 09, 2017 2:38 pm

» New member here!
by c sitas Thu Apr 06, 2017 7:49 am

» Fixing a bad delflex
by Daniel Levesque Tue Apr 04, 2017 11:13 am

» H L Bailey Plans
by ora8i Sun Apr 02, 2017 1:49 am

» Top of Crossbow (launch?)
by Geezer Thu Mar 30, 2017 9:41 pm


    inlet vs seperate mechinism

    Share

    phuphuphnik
    Workshop Savvy

    Did you see my tool collection?


    Workshop SavvyDid you see my tool collection?

    Posts : 146
    Join date : 2013-12-02
    Location : The wastes West of Chicago

    inlet vs seperate mechinism

    Post by phuphuphnik on Thu Dec 31, 2015 9:11 am

    Did the more complex locks have a separate lock that set in the stock or was it built into the wood. To better explain, a multi lever lock could be built into 2 plates with spacers and set into a morticed hole in a stock. It could also be built right into a wood stock. Were both ways used? I have a Dutch book with some xrays that  seem to indicate they were pinned right into the stock. I guess this is precise enough....

    Cheers and Happy New Years

    chriso

      Current date/time is Sun May 28, 2017 12:38 am