Crossbows - Everything about Building, Modding, and Using your Crossbow Gear

Latest topics

» Beware of Alchem
by Archer46176 Today at 3:33 pm

» How to measure and cut leather for prod
by Celtic Archer Yesterday at 5:56 pm

» Crossbow with built in lever?
by John Edgerton Thu Aug 17, 2017 12:38 pm

» Of Bows and Torsion Engines
by JacobL Mon Aug 14, 2017 12:03 pm

» Early Lever and pin Crossbow
by topfmine Mon Aug 14, 2017 8:56 am

» Crusader crossbow
by topfmine Mon Aug 14, 2017 8:53 am

» First Efforts
by rickraedeke Tue Aug 08, 2017 5:25 am

» aluminum prod
by Phil Abrahams Fri Aug 04, 2017 8:38 am

» First whitetail buck taken with medieval crossbow
by Phil Abrahams Fri Aug 04, 2017 3:38 am

» Airsoft Crossbow
by JacobL Wed Aug 02, 2017 9:11 pm

» Questions about steel prod specs
by JacobL Mon Jul 31, 2017 8:25 pm

» Faking a medieval composite crossbow prod.
by JacobL Mon Jul 31, 2017 8:13 pm

» Airsoft Bow
by JacobL Sun Jul 30, 2017 1:56 pm

» Hello All!
by JacobL Sun Jul 30, 2017 12:54 pm

» Padre Island Bow
by Geezer Wed Jul 26, 2017 12:14 pm

» Blocked pictures by Photobucket
by Crossbowmen Mon Jul 24, 2017 1:33 pm

» Geezer website?
by Geezer Fri Jul 21, 2017 3:01 pm

» Could I get advise on order of operations?
by Bs1110101 Wed Jul 19, 2017 4:02 am

» Renaissance Sporting crossbow
by chaz Mon Jul 10, 2017 12:22 am

» Welcome! Welcome! Welcome!
by Agniznag Sat Jul 08, 2017 12:26 pm

» The Arbalist Guild - Around the World
by Agniznag Sat Jul 08, 2017 11:56 am

» opinions please
by Geezer Thu Jul 06, 2017 10:19 pm

» Hello all!
by Tarzan65 Thu Jul 06, 2017 10:54 am

» Yet another one
by Daniel Levesque Sun Jul 02, 2017 9:37 am

» Renaissance peep sight
by kenh Fri Jun 30, 2017 4:48 am


    Shafting: 3/8" vs.11/32"?

    Share

    Stonedog
    Tinkerer

    If there is a will, there is a way.


    TinkererIf there is a will, there  is a way.

    Posts : 107
    Join date : 2012-07-04

    Shafting: 3/8" vs.11/32"?

    Post by Stonedog on Wed Dec 12, 2012 5:02 pm

    First, I am not concerned with historical accuracy, but I am concerned about hunting and shooting accuracy.
    That being said, I have 3/8" and 11/32" diameter shafting, oak and ash respectively.
    What is going to be superior?
    11/32" would be easier to make as all of my broad heads and small game heads are for 11/32", but I can switch over no problem.
    What concerns me is being able to taper them properly for broad heads...I already have a woodchuck taper grinder.

    His concerned should I be about spine?

    Thoughts?

    Stonedog
    Tinkerer

    If there is a will, there is a way.


    TinkererIf there is a will, there  is a way.

    Posts : 107
    Join date : 2012-07-04

    Re: Shafting: 3/8" vs.11/32"?

    Post by Stonedog on Wed Dec 12, 2012 6:05 pm

    Never mind! My search-fu was weak....and then it came back Iolo answered my question in an earlier post!

      Similar topics

      -

      Current date/time is Mon Aug 21, 2017 7:36 pm