Crossbows - Everything about Building, Modding, and Using your Crossbow Gear

Latest topics

» GLOSSARY OF TERMS
by Onager Lovac Today at 6:41 pm

» Reverse draw "compound" build
by FrenckBrambo Yesterday at 6:18 am

» Prod specs
by White Oak Yesterday at 4:23 am

» Crusader crossbow
by c sitas Mon May 22, 2017 8:48 am

» The Arbalist Guild - Around the World
by White Oak Mon May 22, 2017 4:03 am

» Hello from Maine
by White Oak Sun May 21, 2017 11:06 pm

» Need to locate Windlass Crossbow, pre 1600, in Rome, Venice, or Florence
by Vincenti Thu May 18, 2017 7:18 pm

» Leonardo Da Vinci string with suport-rolls
by Oppenheimer Tue May 16, 2017 11:40 am

» Compact repeating compound project
by Phil Abrahams Mon May 08, 2017 2:10 pm

» Trying to reduce the power stroke in my next project
by octavioaugusto.oliveira Thu Apr 27, 2017 1:27 pm

» The Road so far......
by Onager Lovac Tue Apr 25, 2017 4:07 pm

» Its good to be back!!
by Juan galeano Tue Apr 25, 2017 9:31 am

» The crossbow...What is?!
by octavioaugusto.oliveira Sat Apr 22, 2017 2:07 pm

» I need your advices on a new crossbow project
by Daniel Levesque Fri Apr 21, 2017 12:58 pm

» Guidance Designing My First Slinger
by kenh Thu Apr 13, 2017 8:17 pm

» New member
by harry6855 Thu Apr 13, 2017 8:28 am

» Chinese style crossbow trigger 3d modeled with templates.
by Bs1110101 Thu Apr 13, 2017 6:14 am

» Berkhamsted Castle and Glasgow Museum wooden prod crossbow
by hullutiedemies Wed Apr 12, 2017 8:52 am

» Hello from Asia
by Daniel Levesque Wed Apr 12, 2017 6:49 am

» Medieval crossbow modeled in Tinkercad, with variant trigger design.
by Bs1110101 Mon Apr 10, 2017 1:42 pm

» New project"s"
by kenh Sun Apr 09, 2017 2:38 pm

» New member here!
by c sitas Thu Apr 06, 2017 7:49 am

» Fixing a bad delflex
by Daniel Levesque Tue Apr 04, 2017 11:13 am

» H L Bailey Plans
by ora8i Sun Apr 02, 2017 1:49 am

» Top of Crossbow (launch?)
by Geezer Thu Mar 30, 2017 9:41 pm


    jayhawk "rebuild" #2

    Share

    panne
    Fresh Blood

    Doesn't mean
    I'm new to crossbows


    Fresh Blood Doesn't meanI'm new to crossbows

    Posts : 46
    Join date : 2012-10-21
    Location : abbeville, la

    jayhawk "rebuild" #2

    Post by panne on Sat Dec 29, 2012 7:52 am

    this one i pieced together from a couple of projects abandoned by other people. the notch lock was already installed but needed a few adjustments. the homemade aluminum prod it had was a total failure, so it became project scrap. i replaced it with an extra jayhawk prod shrink wrapped in deer rawhide. the wedges are osage orange. i may eventually trim the wedges and add side plates, but like the idea of being able to disassemble it for transport so i left it as is for now. it is definitely a fun and accurate backyard plinker. 70#@8 1/4" with a 3 1/2" brace.






      Current date/time is Wed May 24, 2017 7:16 pm