Crossbows - Everything about Building, Modding, and Using your Crossbow Gear

Latest topics

» How to measure and cut leather for prod
by Celtic Archer Yesterday at 5:56 pm

» Beware of Alchem
by Geezer Fri Aug 18, 2017 3:38 pm

» Crossbow with built in lever?
by John Edgerton Thu Aug 17, 2017 12:38 pm

» Of Bows and Torsion Engines
by JacobL Mon Aug 14, 2017 12:03 pm

» Early Lever and pin Crossbow
by topfmine Mon Aug 14, 2017 8:56 am

» Crusader crossbow
by topfmine Mon Aug 14, 2017 8:53 am

» First Efforts
by rickraedeke Tue Aug 08, 2017 5:25 am

» aluminum prod
by Phil Abrahams Fri Aug 04, 2017 8:38 am

» First whitetail buck taken with medieval crossbow
by Phil Abrahams Fri Aug 04, 2017 3:38 am

» Airsoft Crossbow
by JacobL Wed Aug 02, 2017 9:11 pm

» Questions about steel prod specs
by JacobL Mon Jul 31, 2017 8:25 pm

» Faking a medieval composite crossbow prod.
by JacobL Mon Jul 31, 2017 8:13 pm

» Airsoft Bow
by JacobL Sun Jul 30, 2017 1:56 pm

» Hello All!
by JacobL Sun Jul 30, 2017 12:54 pm

» Padre Island Bow
by Geezer Wed Jul 26, 2017 12:14 pm

» Blocked pictures by Photobucket
by Crossbowmen Mon Jul 24, 2017 1:33 pm

» Geezer website?
by Geezer Fri Jul 21, 2017 3:01 pm

» Could I get advise on order of operations?
by Bs1110101 Wed Jul 19, 2017 4:02 am

» Renaissance Sporting crossbow
by chaz Mon Jul 10, 2017 12:22 am

» Welcome! Welcome! Welcome!
by Agniznag Sat Jul 08, 2017 12:26 pm

» The Arbalist Guild - Around the World
by Agniznag Sat Jul 08, 2017 11:56 am

» opinions please
by Geezer Thu Jul 06, 2017 10:19 pm

» Hello all!
by Tarzan65 Thu Jul 06, 2017 10:54 am

» Yet another one
by Daniel Levesque Sun Jul 02, 2017 9:37 am

» Renaissance peep sight
by kenh Fri Jun 30, 2017 4:48 am


    BHs for 3/8" OD shafts found!

    Share

    Stonedog
    Tinkerer

    If there is a will, there is a way.


    TinkererIf there is a will, there  is a way.

    Posts : 107
    Join date : 2012-07-04

    BHs for 3/8" OD shafts found!

    Post by Stonedog on Sat Nov 16, 2013 4:57 am

    [url=http://www.tuffhead.com/broadheads/tuffhead main.html]http://www.tuffhead.com/broadheads/tuffhead%20main.html[/url]


    300 grains and will accept (properly) a 3/8" OD shaft......perfect for oak shafts!

    Cheap? No....but hopefully you are a good enough shot not to need half a dozen a year!

    Stonedog
    Tinkerer

    If there is a will, there is a way.


    TinkererIf there is a will, there  is a way.

    Posts : 107
    Join date : 2012-07-04

    Re: BHs for 3/8" OD shafts found!

    Post by Stonedog on Sat Nov 16, 2013 5:33 am

    Or.....if you needed to you could use woody weights with existing bhs and an 11/32" shaft...

      Current date/time is Mon Aug 21, 2017 11:48 am